The ACCESS Master Anritsu OTDR MT9083A2 OTDR now features a 7-inch widescreen TFT-LCD display for use both indoors and outdoors, enhanced battery operation time (up to 12 hours) increased operating temperature range (-10° to 50°C) and new short-cut function keys.
Anritsu OTDR MT9083A2 OTDR – Baseline Features
Ready to test in less than 15 seconds…and all day without recharging
Specialized testing modes simplify operation
High resolution and high dynamic range ensure thorough and complete fiber evaluation
Intelligent analysis software identifies problem splices, connectors and even macrobends
Rugged, sealed design provides years of service in the most challenging environments
Test up to four wavelengths with a single unit – single mode, multimode or both
ITU-T recommended 1650nm for in-service troubleshooting
Verify connector quality with optional connector inspection microscope
SCPI remote command support
Anritsu OTDR MT9083A2 OTDR – Enhancements: NEW
Larger (7 inch), higher resolution (800 × 400) display with LED backlight
Longer battery operation time: Up to 12 hours
Wider operating temperature range: -10°C to 50°C
Lighter — now only 2.6 kg (5.7 lbs)
Anritsu OTDR MT9083A2 OTDR
Until now, installing and maintaining optical networks required technicians to carry a variety of equipment which was not only cumbersome, but also expensive. Hearing this common complaint, Anritsu engineers have developed their new line of MT9083 ACCESS Master OTDRs. The Anritsu OTDR MT9083A2 OTDR test sets are designed to make your measurement experience simple and error-free with true one-button fault location, pass/fail classification, automated file saving and naming and even a macrobend detection feature for identifying installation issues. They feature multiple wavelengths and options to satisfy any network testing requirement: access or metro, FTTx or LAN…all without straining your budget.
For customers installing and maintaining metro area or core networks, the ACCESS Master offers an automated fiber construction application and multiple wavelengths including specialty applications.
Additional features include an integrated light source and power meter plus options to customize the unit including higher range power meters, visual fault locator (VFL) and connector inspection microscope to ensure complete network evaluation with a single tool.
Built-in PON Power Meter for Triple-play live measurement
Optional Stabilized Laser Source, SM/MM Power Meter and VFL
FTTx in-service testing/ Testing through splitter: (1625/1650nm with filter)
Splitter & fiber-end identifiable
Auto/Manual(2-point/5-point)/Averaging/Real-time test
Pass/Fail assessment and ORL test function
Quick start: <5 seconds
Perfect user interface, handheld & lightweight (1kg)
Hotkeys: Easiest operation in the world, push-and-test
1000 test records storage
Bellcore file format (.sor)
PC software for batch data processing
USB/RS-232 data interface, driver-free
Multiple languages: EN/DE/IT/FR/ES/PT/RU/KR/VN/CN etc.
8 hrs continuous operation/20 hrs standby
Dust-shock proof (2mdrop test)
CE, FCC, FDA certificates
The compact Shineway OTDR – palmOTDR now offers even more testing capacities, flexibility and value with combination of 850/1300/1310/1490/1550/1625/1650nm (Mono/double/triple wavelength) OTDR, 1310/1490/1550nm PON Power Meter, Stabilized Laser Source and VFL. The OTDR wavelengths cover the applications of regular end-to-end fiber characterization (1310/1550nm), premise/enterprise LAN testing (850/1300nm), FTTx fiber link construction verification (1490nm) and PON live fiber troubleshooting (1625/1650nm with filter). The integrated PON Power Meter can perform in-service testing of all PON signals (1310/1490/1550nm) on any spot of the network featuring pass-through design and burst mode support. palmOTDR is your ultimate solution to meet various testing requirements of entire fiber network.
In-service testing (1625/1650nm with filter)
Testing through splitter, splitter and fiber end identifiable
Shineway OTDR – palmOTDR – Live Optical Signal Check
When Shineway OTDR palmOTDR tests with 1310/1490/1550nm wavelength, the live signals transmitting in the tested fiber may not only affect OTDR measurements but also damage the equipments connected to the network (SDH/WDM/PON) and OTDR receiver. palmOTDR series avoids the problem by starting in-service communication check before testing with message warning and auto termination functions to effectively protect test instruments and communications equipments.
Shineway OTDR – palmOTDR – Built-in PON Power Meter
The integration of PON Power Meter into such a small unit of palmOTDR makes FTTx certification and troubleshooting an exciting experience and efficient work. The PON Power Meter module can perform in-service testing of all PON signals (1310/1490/1550nm) on any spot of the network featuring pass-through design, burst mode and Pass/Warning/Fail assessment function, which can greatly help you evaluate PON signals transmission quality.
(1) Specifications describe the instrument’s warranted performance, measured with typical PC-type connectors. Uncertainties due to the refractive index of fiber are not considered.
(2) The dynamic range is measured at maximum pulse width within averaging time of 3 minutes.
(3) Conditions for dead zone measurement: Reflection event is at0.6Km, reflection intensity is less than -45dB, event dead zone is measured with pulse width of 10ns (type A with 12ns); attenuation dead zone is measured with pulse width of 30ns.
(4) Among the selectable ranges 160 and240kmare only for type B, C & D;120Kmis only for type A.
(5) Among the pulse widths 5ns, 10ns, 300ns, 10μs and 20μs are only available for type B, C & D; 12ns and 275ns are only for type A.
(6) Visible fault locator module is standard on S20BE, S20C/N and S20D/N; optional on M20AE, S20AE, S20C/P, S20C/X, S20C/E, P11C and P13C.
(7) Stabilized laser source module is optional on all models.
(8) Stabilized laser source shares palmOTDR optical port and work on the same working wavelength of palmOTDR.
(9) Optical power meter module is optional on M20AE, S20AE, S20BE, S20C/N, S20D/N, S20C/P, S20C/X and S20C/E.
(10) PON power meter module is standard on P11C, P13C, P31C and P33C.
* Specifications subject to change without notice
Options:
1. palmOTDR-XXX-V Visible Fault Locator module for palmOTDR
2. palmOTDR-XXX-P Optical Power Meter module for palmOTDR
3. palmOTDR-XXX-S Stabilized Laser Source module for palmOTDR
NOYES OFL280 FlexTester offers an unmatched combination of fiber test functions, ease-of-use, portability, and value. All NOYES OTDR OFL280 OTDR FlexTester models include:
Single-mode, 1310/1550 nm OTDR with standard and PON modes
Optical Power Meter (OPM)
Optical Light Source (OLS)
Visual Fault Locator(VFL)
TRM 2.0 Basic Test Results Manager software
NOYES OTDR OFL280 OTDR FlexTesters are ideal for use in the outside plant environment – standard features include:
Color display easily viewed in both direct sunlight and dimly lit areas
Ten (10) hours continuous operation from Li-Ion battery
Rugged, but light weight at only 0.8 kg (1.7 lb)
Native language support in over a dozen languages
MODELS
OFL280-100 provides the best balance of functions and value for many users. Dual-wavelength testing at 1310 and 1550 nm is normally sufficient to certify point-to-point or FTTx (PON) networks and detect macro bends.
OFL280-103 triple-wavelength model adds ServiceSafe™ live fiber detection with integrated PON Power Meter. Configuration is simple with the following functions provided from a single test port:
Certify dark PON and point-to-point networks at 1310/1550 nm
Perform high-resolution fault-location of dark or live FTTx PONs at 1625 nm
Measure FTTx power levels at 1490 and 1550 nm
OFL280-101 and OFL280-102 models offer 1310/1550 and either 1625 nm or 1490 nm test capability, respectively.
AFL’s exclusive Wave ID source and power meter feature is provided in all models. With Wave ID, the power meter automatically synchronizes its wavelength to that sent by the Wave ID source at the other end of the fiber. Test time is significantly reduced, and wavelength setup errors (mismatch between source and power meter) are eliminated.
The NOYES OTDR OFL280 OTDR FlexTester user interface is equally suitable for both novice and expert users, and features a top-down menu structure that is easy to learn and efficient to use.
OTDR test results may be saved as .SOR files, which can be transferred to a PC for viewing, printing, and analysis using supplied Windows® compatible TRM 2.0 Basic Test Results Manager software. TRM can also be used to view OPM and FOCIS connector inspection results and integrate them into test reports.
Advanced analysis and reporting capabiities, including macro-bend detection and bi-directional trace averaging, are available by upgrading to TRM 2.0 Advanced.
NOYES OTDR OFL280 OTDR Additional Features
OTDR, PON OTDR, live fiber OTDR, and FTTx PON Power Meter all from one test port
Full Auto, Real Time, and Expert OTDR modes
Internal storage (>1000 OTDR traces in standard .SOR format)
The OFL280 FlexTester is available in two different kit options:
FlexTester PRO Test & Inspection Kit — Combines user-specified OFL280 FlexTester with standard accessories plus FOCIS Fiber Optic Connector Inspection System and optical connector cleaning supplies into a rugged, waterproof hard-shell carry case.
FlexTester with Soft Carry Case — Combines user-specified OFL280 FlexTester with standard accessories and One-Click Cleaner into a convenient, lightweight soft carry case.
All OFL280 FlexTester kits include (1) SC and (1) FC adapter for the OTDR/OLS port, (1) 2.5 mm universal adapter for the OPM port, (1) 2.5 mm universal adapter for the VFL port, USB cable (connects with Type A USB port on your PC), Windows-compatible TRM 2.0 Basic trace analysis and reporting software, rechargeable, replaceable Li-Ion battery pack, and AC power adapter with a country-specific power cord. Specify the connector ferrule finish (UPC or APC) at order entry time.
NOYES OTDR OFL280 OTDR ORDERING INFORMATION
OFL280 FlexTester PRO Kits
Model Number
Description
OFL280-100[C]-[LLL]-PRO
1310/1550 nm OTDR, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case, APC or UPC
OFL280-101[C]-[LLL]-PRO
1310/1550/1625 nm OTDR, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case, APC or UPC
OFL280-102[C]-[LLL]-PRO
1310/1490/1550 nm OTDR, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case, APC or UPC
OFL280-103[C]-[LLL]-PRO
1310/1550/1625 nm live PON OTDR with ServiceSafe™ live fiber detection, integrated PON Power Meter, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case, APC or UPC.
OFL280 FlexTester with Soft Carry Case
Model Number
Description
OFL280-100[C]-[LLL]
1310/1550 nm OTDR, OLS/OPM with Wave ID, VFL, One-Click Cleaner, soft carry case, TRM 2.0 Basic, APC or UPC.
OFL280-101[C]-[LLL]
1310/1550/1625 nm OTDR, OLS/OPM with Wave ID, VFL, One-Click Cleaner, soft carry case, TRM 2.0 Basic, APC or UPC.
OFL280-102[C]-[LLL]
1310/1490/1550 nm OTDR, OLS/OPM with Wave ID, VFL, One-Click Cleaner, soft carry case, TRM 2.0 Basic, APC or UPC.
OFL280-103[C]-[LLL]
1310/1550/1625 nm live PON OTDR, with ServiceSafe™ live fiber detection, integrated PON Power Meter, OLS/OPM with Wave ID, VFL, One-Click Cleaner, soft carry case, TRM 2.0 Basic, APC or UPC.
Specify the connector ferrule finish ([C] = U for UPC; [C] = A for APC).
All OFL280s are shipped with a Quick Reference Guide in English and the English user interface enabled. To obtain a Quick Reference Guide and user interface in another language, select from one of the following:
[LLL] Suffix
Language
ENG
English
CHS
Simplified Chinese
CHT
Traditional Chinese
DEU
Deutsche (German)
FRA
French
ITA
Italian
KOR
Korean
POL
Polish
POR
Portuguese
SPA
Spanish
TUR
Turkish
NOYES OTDR OFL280 OTDRSoftware Update
Click here to register and download the latest software update for your OFL280 FlexTester.
NOYES OTDR OFL280 OTDR Accessories, Prepaid Calibration and Extended Warranties:
OFL280s are supplied with SC and FC OTDR/OLS connector adapters plus 2.5 mm universal adapters for the OPM and VFL. See the OFL280 datasheet for additional accessories including:
Adapter caps
Fiber rings (launch cords)
TRM 2.0 Advanced Test Results Manager
Prepaid calibration service with or without extended warranty
Prepaid Calibration Plans
For details see the Prepaid Calibrations and Calibration Plus plans product page.
NOYES OTDR M210 OTDR from AFL combines ease of use (Touch and Test®) and multi-functionality in a field rugged, hand-held package. Integrated OTDR and OPM functionality and inspection capability reduce setup and testing time and simplify documentation; reducing testing and administration costs.
With single-mode dynamic ranges of up to 30 dB and multimode dynamic ranges of 26 dB, the NOYES OTDR M210 OTDR is ideal for testing, troubleshooting and documenting enterprise, LAN/WAN, campus and military single-mode and multimode (62.5 and 50 micron) fiber networks.
The latest member of the NOYES M200 product family combines market proven reliability with expanded capabilities. Launched in 2006, the M200 is a 2012 Test of Time finalist, and used by thousands of AFL customers.
NOYES OTDR M210 OTDR Multifunction OTDR Features:
Built in Optical Power Meter – Easily test and store both Tier 1 and Tier 2 results in one tester
Built in Visual Fault Locator (VFL) enables technicians to quickly identify fiber faults within OTDR dead zone
Dynamic Range covers longer fiber systems
30 dB Single-mode
26 dB Multimode
Field proven, compact, rugged product packaging is designed for both outside plant use and cramped inside plant environments.
NOYES OTDR M210 OTDR Touch and Test® supports users of all levels
Full Auto Mode – Connect and press test. NOYES OTDR M210 OTDR will detect fiber and set recommended test parameters. Perfect for novice technicians or repair techs quickly looking for faults on fiber spans of unknown length.
Auto-Once Mode – Designed for testing cables with multiple fibers. NOYES OTDR M210 OTDR performs a full auto test on the first fiber and retains recommended settings allowing fast expert-speed testing of subsequent fibers.
Expert Mode – Provides access to testing parameters for experienced users to setup optimal testing scenarios for specific networks.
Real-Time Mode – Continuous OTDR operation and display update allows users to dynamically change networks while monitoring OTDR trace results. Example: relaxing fiber bends to reduce attenuation loss.
Top menu level touch screen access to major test modes allow users to test networks faster- no time wasted with complicated menu structures. The NOYES OTDR M210 OTDR provides one-touch access to OTDR and OPM test modes and DFS inspection mode when enabled.
NOYES OTDR M210 OTDR Touch and Test® Features
Set Pass/Fail thresholds compliant with TIA/ISO/user-defined values to alert test operators of failing or marginal events.
New Job creation editor with detailed job/file naming allows users to quickly create file for storing results with flexibility for custom Job, Route, Cable, Fiber file naming.
Structured file management to logically and easily store test results.
Results Manager allows in-unit review saved test results and quick selection of previously created jobs for storing current job test results.
Access general settings including Date/Time/Number format options and an Auto Off feature.
OTDR settings enhanced event measurements with various manual LSA methods available in Expert mode.
A simple toggle function enables fast and logical storage of trace, Loss and inspection results from both ends of a fiber/cable.
The M210 supports visual inspection per IEC 61300-3-5 visual inspection practices using a NOYES DFS1 Digital FiberScope providing the user the ability to view and document connector end-face images with their OTDR traces and loss/power measurements
Touch and Test® capabilities simplify the user experience; reduce training time and testing errors enabling even novices to get the job done quickly and accurately.
NOYES OTDR M210 OTDR Data Storage and Reporting Capabilities (TRM)
Thousands of test results may be stored internally or on the supplied USB drive. Test results are transferable via USB cable or USB drive to a computer for viewing, printing, and analyzing with the supplied Windows® compatible software – TRM™ (Test Results Manager). Acceptance reports generated using TRM can include OTDR traces with summary and event information with or without pass/fail indication, Event Maps, Loss/Power measurement tables and end-face images.
With a full set of testing and troubleshooting tools including OTDR, OPM, VFL and end-face inspection capability the M210 is a complete solution for fiber network owners and installers.
Supported Languages
English
French
German
Italian
Polish
Portuguese
Spanish
NOYES OTDR M210 OTDR Additional Features:
Internal storage (>1000 OTDR traces in standard .SOR format)
New crisp bright (indoor/outdoor) color touchscreen display
Transfer test results to a PC via USB
Easy to use and learn
Tool-free, switchable test port adapters
Single-mode and multimode models with 850/1300/1310/1550 nm wavelength options
Settable Pass/Fail thresholds to standards or user specified values
Test Results Manager, TRM™ reporting software for analyzing results, documenting networks and creating acceptance reports
NOYES OTDR M210 OTDR Ordering Information
The NOYES OTDR M210 OTDR is offered in three optical models: multimode, single-mode and combined as a QUAD multimode/single-mode. (See data sheet for ordering information). The NOYES OTDR M210 OTDR is available in a softcase with carry handle and shoulder strap or in a compact rugged transit case and as part of a QUAD Certification kit or a QUAD Test and Inspection kit. Both soft and hard cases have room to carry the M210, power cord, fiber rings, and adapters, cleaning supplies, other accessories and documentation. The hard case has a full length hinge, pad lock loops, secure snap latches and O-ring seal to protect the contents from dust and water.
M210 QUAD Certification Kit is designed for integrated SM and MM Tier1 and Tier2 testing with fiber end-face image capture. The NOYES OTDR M210 OTDR stores OTDR traces, loss readings and end-face images in a logical Job Structure for each fiber. Review results on the M210 and transfer to a PC for analysis and acceptance report documentation using included companion Test Results Manager (TRM) software. In TRM apply standards and applications to loss readings to assure fibers meet the increasing bandwidth needs of fiber networks such as 10 GbE. This kit includes a QUAD M210, OLS4 LED/Laser Source, DFS1-00-04XU or DFS1-00-04XA Digital FiberScope kit and cleaning accessories in a compact rugged hard transit case. (Specify DFS-00-04XU or DFS-00-04XA when ordering)
M210 QUAD Test and Inspection Kit is designed for performing Tier 2 OTDR testing and troubleshooting and end-face inspection. This kit includes the QUAD M210, a DFS1 FiberScope and cleaning accessories in a compact rugged hard transit case. (Specify DFS-00-04XU or DFS-00-04XA when ordering)
DESCRIPTION
AFL NUMBER
M210 OTDR Field Certification Kit: Tier 1 and 2 w Inspection in Hard Case
M210-25K-01-HC2
M210 OTDR Tier 2 Test and Inspection Kit in Hard Case
NOYES OTDR CS260 OTDR Contractor Series Handheld Troubleshooting OTDRs
NOYES OTDR CS260 OTDR Contractor Series handheld OTDRs enable cost-effective troubleshooting of FTTx PONs and point-to-point metro/access networks. Two models are offered: CS260-10 FTTx PON Activation and Troubleshooting OTDR: 1625 nm Live PON OTDR providing 35 dB dynamic range, best-in-class 0.8 m event and 3.5 m attenuation dead zones, integrated PON power meter and Visual Fault Locator (VFL). CS260-20 Metro/Access Troubleshooting OTDR: 1310/1550 nm OTDR with 30 dB dynamic range, 0.8 m event and 3.5 m attenuation dead zones plus integrated Visual Fault Locator.
The CS260-10 and CS260-20 are purpose-built for optical network activation and troubleshooting tasks. With its integrated PON power meter, the CS260-10 enables verification of downstream 1490 and/or 1550 nm power levels at an FTTx PON ONU or ONT. If downstream signals are absent or power is too low, the CS260-10’s 1625 nm Live PON OTDR allows a technician to scan the network from the ONU/ONT or a network access point to locate fiber faults such as macro-bends, breaks, poor splices and dirty or damaged connectors. The live PON OTDR utilizes an out-of-band 1625 nm wavelength to prevent disrupting the 1310, 1490 and 1550 nm signals present on an in-service FTTx PON.
The CS260-20 is designed to troubleshoot point-to-point metro/access networks operating in the 1310 and/or 1550 nm wavelength regions. Its short dead zones enable precise location of fiber faults. With 30 dB dynamic range, the CS260-20 can locate faults in networks up to 60 km (40 miles) in length.
CS260s are derivatives of AFL’s popular OFL280 and FLX380 FlexTester families, offering the same ease-of-use, high-contrast indoor/outdoor display and over 12 hours of continuous battery operation. Both models also include an integrated VFL (visible red laser) designed to visually pinpoint the location of macro-bends or breaks in splice closures, access terminals and splitter cabinets.
Over 1000 OTDR test results may be saved internally in industry-standard .SOR file format. Stored OTDR results may be transferred to PC via USB port for viewing, analysis, and professional report generation using included Windows® compatible TRM® 2.0 Basic Test Results Manager software. Advanced analysis and reporting capabilities – including macro-bend detection and bi-directional trace averaging – are available by upgrading to TRM 2.0 Advanced Test Results Manager.
NOYES OTDR CS260 OTDR ORDERING INFORMATION:
All CS260 kits include rechargeable, replaceable Li-Ion battery pack, AC charger with country-specific power cord, user-specified adapters for the OTDR and VFL ports, dust caps for all ports, USB cable, TRM® 2.0 Basic Test Results Manager software, and a quick reference guide in any one of the supported languages.
Model Number
Description
CS260-10[F]-[CA]-[LLL]-[PC]
1625 nm Live PON OTDR, integrated PON Power Meter, VFL, One-Click Cleaner, soft carry case, APC or UPC.
Prepaid Calibration plans offer two annual calibrations at a discounted price. Cal Plus plans offer the same services as the Cal plans with the addition of a two year extended warranty (three years total coverage).
NOYES OTDR M310 OTDR Data-Center/Enterprise OTDR with OPM, VFL
NOYES OTDR M310 from AFL is specifically designed to address the technical challenges associated with today’s Data Center architectures and network speeds. Inherent in today’s Top of Rack (TOR) or End of Rack (EOR) data center configurations are ultra-short fiber links, more numerous patch panels and cross-connections. At the same time bandwidth demands is accelerating the deployment of 40 and 100G Ethernet. Network uptime is critical in Data Center networks, being able to pinpoint faults to an end of a jumper cable and get the network back on line is crucial.
The NOYES OTDR M310 combines ease of use (Touch and Test®) with industry leading specifications in a field rugged, hand-held package. Integrated OTDR, OPM and VFL functionality with inspection capability simplifies setup, testing or troubleshooting and reduces network outage time .
With dead- zones less than 1 m and dynamic ranges of up to 38 dB the M310 is ideal for testing, troubleshooting and documenting Data Center, Enterprise, SAN/LAN/WAN, co-location, campus, Department of Transportation and military single-mode and multimode (62.5 and 50 micron) fiber networks.
NOYES OTDR M310 OTDR Multifunction OTDR Features and Benefits:
Industry leading dead zones to help validate and troubleshoot typical Data Center and Enterprise networks comprised of multiple connections and short jumpers.
Event Dead Zones 0.8m
Attenuation Dead-zones < 3 m
Enhanced Mode Fill (EMF) – Enables users to get more accurate loss results, comparable to measurements made with expensive external mode conditioners without sacrificing dynamic range or adding another box to manage during testing
Built in Optical Power Meter – Test and store both Tier 1 and Tier 2 results in one tester
Built in Visual Fault Locator (VFL) – enables technicians to quickly identify fiber faults within OTDR dead zone and verify polarity
Front End and First Connector checks – verify launch quality to help users obtain better OTDR trace results
Live Fiber Detection and Indication – direct users to validate they are on the correct fiber or turn off the source so they can obtain an OTDR trace
Dynamic Range suited testing fibers beyond the Data Center
38 dB Single-mode
30 dB Multimode
Inspection ready – the M310 supports the DFS Digital FiberScope for inspecting the finish and cleanliness of connector end-faces, which is a leading cause of network failures
Fast Real Time OTDR mode for use in troubleshooting or splicing applications
Field proven, compact, rugged product packaging is designed for both outside plant use and cramped inside plant environments.
NOYES OTDR M310 OTDR Touch and Test® supports users of all levels
Full Auto Mode – Connect and press test. M310 will detect fiber and set recommended test parameters. Perfect for novice technicians or repair techs quickly looking for faults on fiber spans of unknown length. Auto-Once Mode – Designed for testing cables with multiple fibers. M310 performs a full auto test on the first fiber and retains recommended settings allowing fast expert-speed testing of subsequent fibers. Expert Mode – Provides access to testing parameters for experienced users to setup optimal testing scenarios for specific networks. Real-Time Mode – Fast continuous OTDR operation and display update allows users to dynamically change networks while monitoring OTDR trace results. Example: relaxing fiber bends to reduce attenuation loss.
NOYES OTDR M310 OTDR Touch and Test® Features
Top menu level touch screen access to major test modes allow users to test networks faster- no time wasted with complicated menu structures. The M310 provides one-touch access to OTDR and OPM test modes and DFS inspection mode when enabled.
Set Pass/Fail thresholds compliant with TIA/ISO/user-defined values to alert test operators of failing or marginal events.
New Job creation editor with detailed job/file naming allows users to quickly create file for storing results with flexibility for custom Job, Route, Cable, Fiber file naming.
Structured file management to logically and easily store test results.
Results Manager allows in-unit review saved test results and quick selection of previously created jobs for storing current job test results.
Access general settings including Date/Time/Number format options and an Auto Off feature.
OTDR settings enhanced event measurements with various manual LSA methods available in Expert mode.
A simple toggle function enables fast and logical storage of trace, Loss and inspection results from both ends of a fiber/cable.
The NOYES OTDR M310 OTDR supports visual inspection per IEC 61300-3-5 visual inspection practices using a NOYES DFS1 Digital FiberScope providing the user the ability to view and document connector end-face images with their OTDR traces and loss/power measurements Touch and Test® capabilities simplify the user experience; reduce training time and testing errors enabling even novices to get the job done quickly and accurately.
NOYES OTDR M310 Data Storage and Reporting Capabilities (TRMTM)
Thousands of test results may be stored internally or on the supplied USB drive. Test results are transferable via USB cable or USB drive to a computer for viewing, printing, and analyzing with the supplied Windows® compatible software – TRM™ 2.0 Basic Analysis and Documentation Software (Test Results Manager). Acceptance reports generated using TRM 2.0 can include OTDR traces with summary and event information with or without pass/fail indication, Event Maps, Loss/Power measurement tables and end-face images.
Please click to learn more about TRM 2.0.
Advanced Analysis Software
The Advanced Analysis software features macro/microbend detection and bi-directional trace analysis and is available for the M310 and in TRM 2.0 Advanced Analysis PC software. Macro/Microbend detection helps technicians identify installation problems. Excessive bends or stress on fibers will show up as excessive attenuation at higher wavelengths. These bends or stresses are indicated on the Event Table with a special icon. Bi-directional trace analysis, used to resolve errors due to mis-matched single-mode fibers, measures the loss of events in the End 1 to End 2 and End 2 to End 1 directions, then calculates a two-way average of the OTDR’s loss measurements, which is the true loss of the event. (see M310 and TRM specification sheets or below for ordering information)
Supported Languages
English
French
German
Italian
Polish
Portuguese
Spanish
Turkish*
*Contact the factory for availability
NOYES OTDR M310 Ordering Information
The NOYES OTDR M310 is offered in three optical models: multimode, single-mode and combined as a QUAD multimode/single-mode. (See data sheet for ordering information). The M310 Data Cener OTDR is available in a softcase with carry handle and shoulder strap or in a compact rugged transit case and as part of a Certification kit or a Test and Inspection kit. Both soft and hard cases have room to carry the M310, power cord, fiber rings, and adapters, cleaning supplies, other accessories and documentation. The hard case has a full length hinge, pad lock loops, secure snap latches and O-ring seal to protect the contents from dust and water. NOYES OTDR M310 OTDR Certification Kits are designed for integrated Tier1 and Tier2 testing with fiber end-face image capture. The NOYES OTDR M310 stores OTDR traces, loss readings and end-face images for each fiber in a logical Job Structure. Review results on the M310 and transfer to a PC for analysis and acceptance report documentation using included companion Test Results Manager (TRM) 2.0 software. In TRM apply standards and applications to loss readings to assure fibers meet the increasing bandwidth needs of fiber networks such as 10 GbE. These kits include a M310, an Optical Light Source, Digital FiberScope and cleaning accessories in a compact rugged hard transit case. Select the kit below to meet your single-mode, multimode or QUAD testing requirements, be sure to specify DFS-00-04XU (PC/UPC) or DFS-00-04XA (APC) Digital FiberScope when ordering. M310 Test and Inspection Kits are designed for performing Tier 2 OTDR testing and troubleshooting and end-face inspection. These kits include a SM, MM or QUAD M310, TRM 2.0 software analysis software, a DFS1 FiberScope and cleaning accessories in a compact rugged hard transit case. Select the OTDR Test and Inspection kit to meet your testing needs below, be sure to specify DFS-00-04XU (PC/UPC) or DFS-00-04XA (APC) when ordering.
DESCRIPTION
AFL NUMBER
M310 QUAD Certification Kit (Tier 1 and 2): M310 QUAD, OLS4, DFS in Hard Case
M310-25K-01-HC2*
M310 SM Certification Kit (Tier 1 and 2): M310 SM, OLS2-DUAL, DFS in Hard Case
M310-20K-01-HC2*
M310 MM Certification Kit (Tier 1 and 2): M310 MM, OLS1-DUAL, DFS in Hard Case
M310-22K-01-HC2*
* When ordering, specify DFS model. The DFS FiberScope kit is available as either PC/UPC inspection kit (DFS-00-04XU) or APC inspection kit (DFS-00-04XA)
M310 QUAD Test and Inspection Kit: M310 QUAD and DFS in Hard Case
M310-25K-01-HC1*
M310 OTDR, Test and Inspection Kit: M310 SM and DFS in Hard Case
M310-20K-01-HC1*
M310 OTDR, Test and Inspection Kit: M310 MM and DFS in Hard Case
M310-22K-01-HC1*
* When ordering, specify DFS model. The DFS FiberScope kit is available as either PC/UPC inspection kit (DFS-00-04XU) or APC inspection kit (DFS-00-04XA)
M310 QUAD OTDR, OPM, VFL in Hard Case
M310-25U-01-HC
M310 SM OTDR, 1310/1550, OPM, VFL in Hard Case
M310-20U-01-HC
M310 MM OTDR, 850/1300, OPM, VFL in Hard Case
M310-22U-01-HC
M310 QUAD OTDR, OPM, VFL in Soft Case
M310-25U-01
M310 SM OTDR, 1310/1550, OPM, VFL in Soft Case
M310-20U-01
M310 MM OTDR, 850/1300, OPM, VFL in Soft Case
M310-22U-01
Prepaid Calibration Plans and Calibration Plus Plans
The NOYES OTDR FLX380 FlexTester is the world’s smallest, lightest, most complete single-mode fiber optic test set. It combines high-performance, PON-optimized, multi-wavelength OTDR/PON OTDR, OLS, OPM, VFL and PON Power Meter in a rugged, hand-held package.
The NOYES OTDR FLX380 FlexTester offers an unmatched combination of optical test functions, ease-of-use, portability and value, including:
41 dB dynamic range OTDR
Best-in-class event, attenuation, and PON dead zones
AFL’s unique ServiceSafe™ Live PON OTDR
Fast, error-free loss-testing using Wave ID synchronization.
Over 12 hours continuous testing without battery replacement or recharge
Integrated 50 m launch fiber.
The handheld FLX380 FlexTester is offered in three models to best suit your application requirements:
FLX380-103: Most complete high-performance test set for verifying both in-service (live) and out-of-service FTTx PONs. Includes ServiceSafe™ live PON detection, integrated PON power meter and 1625 nm filtered live PON OTDR, all from a single port.
FLX380-102: 1310/1490/1550 nm OTDR, OLS, OPM and VFL for complete out-of-service testing at all FTTx PON wavelengths.
FLX380-100: Lowest cost, high-performance, all-in-one 1310/1550 nm OTDR, OLS, OPM and VFL for out-of-service installation testing or troubleshooting both FTTx PON and point-to-point fiber optic networks.
The Noyes OTDR FLX380 FlexTester user interface provides modes suitable for both novice and expert users. It features a top-down menu structure which is both easy to learn and a pleasure to use. User interface software supports over a dozen languages including English, Chinese (Simplified and Traditional), French, German, Italian, Japanese, Korean, Portuguese, Polish, Russian and Spanish.
Over 1000 OTDR test results may be saved in industry-standard .SOR file format. Stored OTDR and OPM results may be transferred to PC via USB port for viewing, analysis, and professional report generation using the included Windows® compatible TRM® 2.0 Basic Test Results Manager software.
Advanced analysis and reporting capabilities, including micro-/macro-bend detection and bi-directional trace averaging, are available by upgrading to TRM 2.0 Advanced.
The FLX380 FlexTester is available in two different kit options:
FlexTester PRO Test & Inspection Kit – Combines user-specified FLX380 FlexTester with standard accessories plus FOCIS Fiber Optic Connector Inspection System and optical connector cleaning supplies into a rugged, waterproof hard-shell carry case.
FlexTester with Soft Carry Case – Combines user-specified FLX380 FlexTester with standard accessories and One-Click Cleaner into a convenient, lightweight soft carry case.
All Noyes OTDR FLX380 kits include rechargeable, replaceable Li-Ion battery pack, AC charger with country-specific power cord, (1) SC and (1) FC adapter for the OTDR/OLS port, (2) 2.5 mm Universal adapters for the OPM and VFL ports, dust caps for all ports, USB cable, TRM® 2.0 Basic Test Results Manager software, and a quick reference guide in any one of the supported languages.
ORDERING INFORMATION
NOYES OTDR FLX380 FlexTester PRO Kits
AFL NUMBER
DESCRIPTION
FLX380-100A-PRO FLX380-100U-PRO
1310/1550 OTDR, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case; APC or UPC connector
FLX380-102A-PRO FLX380-102U-PRO
1310/1490/1550 OTDR, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case; APC or UPC connector
FLX380-103A-PRO FLX380-103U-PRO
1310/1550/1625 Live PON OTDR, PON Power Meter, OLS/OPM with Wave ID, VFL, FOCIS, cleaning supplies, hard carry case, APC or UPC
NOYES OTDR FLX380 FlexTester with Soft Carry Case
AFL NUMBER
DESCRIPTION
FLX380-100A FLX380-100U
1310/1550 OTDR, OLS/OPM with Wave ID, VFL, One-click cleaner, soft carry case; TRM 2.0 Basic, APC or UPC connector
FLX380-102A FLX380-102U
1310/1490/1550 OTDR, OLS/OPM with Wave ID, VFL, One-click cleaner, soft carry case; TRM 2.0 Basic, APC or UPC connector
FLX380-103A FLX380-103U
1310/1550/1625 Live PON OTDR, PON Power Meter, OLS/OPM with Wave ID, VFL, One-click cleaner, soft carry case; TRM 2.0 Basic, APC or UPC
Accessories of the Noyes OTDR FLX380
FLX380s are supplied with SC and FC OTDR/OLS connector adapters plus 2.5 mm universal adapters for the OPM and VFL. See the FLX380 datasheet for additional accessories including:
Adapter caps for other connectors
Fiber rings (launch cables)
Upgrade to TRM 2.0 Advanced Test Results Manager
FLX380 Prepaid Calibration and Extended Warranty Plans
Prepaid Cal plans offer two annual calibrations at a discounted price. Cal Plus plans offer the same calibration services plus a two year extended warranty (three years total coverage).
Based on the award winning JDSU OTDR T-Berd 8000 (MTS-8000) platform covering installation, maintenance and troubleshooting testing needs of any optical networks, the JDSU OTDR T-Berd 8000 (MTS-8000) V2 meets next generation network challenges with additional fiber inspection & test, ROADM and 40G / 100G test capabilities.
Benefits of the JDSU OTDR T-Berd 8000 (MTS-8000)
Future ready to keep ahead of technology curve: from traditional fiber and BERT testing to advanced high speed ROADM testing and 40G / 100G service activation, maintenance and troubleshooting
Scales as your network scales: mix and match over 40 apps and hundreds of test configurations to meet your exact needs
Cuts down testing and post-processing time: boosted processing power, built-in pass/fail functionality and automated test scripts drive best practices and close-out reports in PDF format
Connects everywhere from anywhere: 3G, WiFi, Bluetooth, USB and Ethernet .
Applications of the JDSU OTDR T-Berd 8000 (MTS-8000)
Highly integrated field optical test solution for single application
Find Out More
The JDSU OTDR T-Berd 6000 (MTS-6000) is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It offers field service technicians the highest levels of performance and upgradeability on the market. Modular in design, the MTS-6000 offers an extensive portfolio of test functionality, with over 40 different fiber modules supporting a wide range of applications, and is a single source for future fiber and photonic testing needs.
Highlights
Compact and lightweight for the field.
Future proof with over 40 application modules already supported.
Choose from IL/ORL, OTDR, PMD, CD, or WDM plug-in modules.
Application modules compatible with MTS-8000.
Backwards compatibility with existing MTS-5000 family OTDR modules.
Simple for the novice, fully featured for the expert.
All-in-one Access/FTTx/Triple-Play Services Test Set
The MTS-4000 JDSU OTDR is a small, compact and handheld OTDR platform designed for all phases of the network lifecycle, from the installation to the maintenance of Access/FTTx networks and triple-play services. Modular in design, the MTS-4000 OTDR offers field service technicians the highest performance and superior levels of scalability and upgradeability.
MTS-4000 JDSU OTDR Highlights
Large 7-inch indoor/outdoor color display
Cost-effective, compact and handheld platform
Multi-layer network solution from physical to services layer
Highly scalable with up to 2 field-replaceable modules
Connection checker with VFL, power meter and video inspection scope options
Flexible connectivity for fast data transfer: 2xUSB 2.0, up to 1 Gb/s Ethernet
Copper test applications include volt/ohm meter, time domain reflectometer (TDR), resistive fault locator, and wideband tones/spectal analysis to 30 MHz
VDSL and ADSL testing using Infineon Technologies chipset and licensed option for Dr. DSL® diagnostic solutions from Aware, Inc.
Enterprise IT network testing: Basic troubleshooting functionality combined with the advanced capability needed to turn up and maintain modern networks
MTS-4000 JDSU OTDR Key Features
Lightweight platform: only 1.4kg/3 lbs
Intuitive graphical user interface with touchscreen option
Extended battery life using smart Lithium ion cell
Scripting capability for automation, simplification and automatic data reporting
Easy Internet access via installed web browser
Remote control access allowing remote assistance from any expert user
Integration of basic applications such as HTML and PDF reader
