Based on the award winning JDSU OTDR T-Berd 8000 (MTS-8000) platform covering installation, maintenance and troubleshooting testing needs of any optical networks, the JDSU OTDR T-Berd 8000 (MTS-8000) V2 meets next generation network challenges with additional fiber inspection & test, ROADM and 40G / 100G test capabilities.

Benefits of the JDSU OTDR T-Berd 8000 (MTS-8000)

• Future ready to keep ahead of technology curve: from traditional fiber and BERT testing to advanced high speed ROADM testing and 40G / 100G service activation, maintenance and troubleshooting
• Scales as your network scales: mix and match over 40 apps and hundreds of test configurations to meet your exact needs
• Cuts down testing and post-processing time: boosted processing power, built-in pass/fail functionality and automated test scripts drive best practices and close-out reports in PDF format
• Connects everywhere from anywhere: 3G, WiFi, Bluetooth, USB and Ethernet .

Applications of the JDSU OTDR T-Berd 8000 (MTS-8000)

• Enables optical connector inspection and full fiber characterization with OTDR, IL, ORL, CD, PMD and AP
• Tests and troubleshoot WDM systems and ROADM networks with Optical Spectrum Analyzers.
• Tests and troubleshoots converged Ethernet/IP networks at 10 Mbps to 100 Gpbs interfaces and captures and analyzes packets
• Tests Layer 1-3 Ethernet/IP SLAs with an automated, enhanced RFC 2544/SAMComplete per ITU-T Y.1564.
• Tests TDM/PDH to SONET/SDH at OC-3/STM-1 to OC-192/STM-64, including service disruption measurements and path overhead (POH) capture with triggers
• Measures PMD on live traffic and tests in-band OSNR in DWDM/ROADM systems with In-Service PMD
• Enables installation and maintenance of OTN networks up to 11.1 Gbps and OTU4 with full 100 Gpbs client .
• Supports 1/2/4/8/10 Gpbs FC for installation and maintenance of SANs and low-latency circuits

Key Features of the JDSU OTDR T-Berd 8000 (MTS-8000)

• 10.4 inch high-visibility touch screen display
• High-speed PowerPC processor, rugged SATA solid-state hard disk and latest high-capacity Li Ion battery technologies
• 1G Ethernet, Wireless connectivity (3G, Wifi, Bluetooth) and four USB interfaces
• Built-in optical options including power meter, VFL and talk set
• Automated connector inspection with IEC pass/fail analysis
• Compatible with T-BERD/MTS-6000 test modules

Highly integrated field optical test solution for single application

The JDSU OTDR T-Berd 6000 (MTS-6000) is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It offers field service technicians the highest levels of performance and upgradeability on the market. Modular in design, the MTS-6000 offers an extensive portfolio of test functionality, with over 40 different fiber modules supporting a wide range of applications, and is a single source for future fiber and photonic testing needs.

Highlights

• Compact and lightweight for the field.
• Future proof with over 40 application modules already supported.
• Choose from IL/ORL, OTDR, PMD, CD, or WDM plug-in modules.
• Application modules compatible with MTS-8000.
• Backwards compatibility with existing MTS-5000 family OTDR modules.
• Simple for the novice, fully featured for the expert.

Applications

• Fault Locator.
• OTDR and power level testing.
• CWDM/DWDM testing.
• PMD, Spectral Attenuation Profile and Chromatic Dispersion (CD) testing.
• Insertion Loss (IL) and Optical Return Loss (ORL) testing.
• FiberComplete™ automated bi-directional OTDR, Insertion Loss and ORL testing.

Key Features

• Lightweight platform: only 2.4kg/5.3 lbs.
• Large 8.4 inch transreflective TFT color display improves viewing under any conditions.
• Intuitive graphical user interface with touchscreen option
• Extended battery life using smart Lithium ion cell.
• Connection Check with VFL, power meter, Loss Test Set/ ORL meter and video inspection scope options
• Built-in optical talkset option for communicating along the fiber.
• Unique automatic bi-directional analysis function available to save up to 50% test time for OTDR, IL, and ORL measurements.
• Fast data transfer via USB, Ethernet port and 1Gb extended memory option.
• Comprehensive suite of PC software tools for post-processing of test results with FiberTrace (OFS-100) and FiberCable (OFS-200).

JDSU OTDR MTS-4000 OTDR

All-in-one Access/FTTx/Triple-Play Services Test Set

The MTS-4000 JDSU OTDR is a small, compact and handheld OTDR platform designed for all phases of the network lifecycle, from the installation to the maintenance of Access/FTTx networks and triple-play services. Modular in design, the MTS-4000 OTDR offers field service technicians the highest performance and superior levels of scalability and upgradeability.

MTS-4000 JDSU OTDR Highlights

• Large 7-inch indoor/outdoor color display
• Cost-effective, compact and handheld platform
• Multi-layer network solution from physical to services layer
• Highly scalable with up to 2 field-replaceable modules
• Connection checker with VFL, power meter and video inspection scope options
• Flexible connectivity for fast data transfer: 2xUSB 2.0, up to 1 Gb/s Ethernet

MTS-4000 JDSU OTDR Applications

• Fiber test applications include OTDR, FiberComplete™ Automatic IL/ORL, CWDM Analyzer, PON/FTTH selective power meter , Connector Inspection with IEC Pass/Fail Analysis as well as Visual Fault Locator, Broadband Power Meter and CW light source
• Copper test applications include volt/ohm meter, time domain reflectometer (TDR), resistive fault locator, and wideband tones/spectal analysis to 30 MHz
• Triple-play service testing/IPTV and VoIP measurements from DSL access interfaces or standard Ethernet port
• VDSL and ADSL testing using Infineon Technologies chipset and licensed option for Dr. DSL® diagnostic solutions from Aware, Inc.
• Enterprise IT network testing: Basic troubleshooting functionality combined with the advanced capability needed to turn up and maintain modern networks

MTS-4000 JDSU OTDR Key Features

• Lightweight platform: only 1.4kg/3 lbs
• Intuitive graphical user interface with touchscreen option
• Extended battery life using smart Lithium ion cell
• Scripting capability for automation, simplification and automatic data reporting
• Easy Internet access via installed web browser
• Remote control access allowing remote assistance from any expert user
• Integration of basic applications such as HTML and PDF reader
• Comprehensive suite of PC software tools for post-processing of test results with FiberTrace (OFS-100) and FiberCable (OFS-200)

The JDSU OTDR T-Berd 2000 (MTS-2000) is a handheld modular test set for the installation, turn-up and maintenance of optical fibers across Entreprise, Metro and FTTx/Access point-to-point or point-to-multipoint networks (PONs).

Benefits of the JDSU OTDR T-Berd 2000 (MTS-2000)

• Hands-free testing. Hands-free case optimizing productivity whether the task is “up poles or down holes” and ensuring all the essential fiber test tools are close at hand comes standard and makes daily work for technicians easier.
• Built for simplicity.  Simple interface and one-touch button operation ensures straightforward use of the instrument. Results are displayed on a large high resolution color touchscreen.
• Widest range of applications. The modular form factor enables to outfit the test set with the exact capabilities needed in the field. Combining such a large array of applications into one handheld test set maximizes return on investment and drives common test methods and procedures.

Applications of the JDSU OTDR T-Berd 2000 (MTS-2000)

• LAN/WAN/Metro/Access/PON OTDR applications. Ensure fast and consistent fiber deployments across your network with the SmartOTDR™ test mode.
• FiberComplete™ application for automated Insertion Loss and ORL testing with fault finding
• CWDM optical spectrum analyzer application
• PON/FTTH selective power meter application
• Digital analysis microscope to inspect connectors end faces and perform IEC pass/fail analysis
• Other Test Applications: optical power meter, visual fault locator and optical talkset

Key Features of the JDSU OTDR T-Berd 2000 (MTS-2000)

• Large 5-inch touch screen display
• Test applications include OTDR, automatic IL/ORL, CWDM analyzer, selective PON power meter and connector inspection with IEC pass/fail analysis
• Built-in optical power meter, VFL  and optical talkset options
• New generation lithium polymer (LiPo)  battery for up to 8 hours operation
• Flexible connectivity with ethernet, USB, bluetooth and wifi capabilities
• Special hands-free bag as standard
• Cross-compatibility with MTS-4000 Multiple Services Test Platform